FPT15-I Portable surge generator is designed for on-site testing of surge protective device and lightning strike counter.The surge generator is able to release max.discharge current 2.5kA, realized one-key operation of charging and discharging. Press the green “Start” button,the surge generator starts charging, the relay starts counting time until the device stop charging, while discharging. When time relay’s indication light off,the test end.
Note: Green “Start” button cannot be repeated click during testing.
Characteristics:
-Portabletype,smallsize.
-On site testing of lightning counter.
-Demonstration of SPD working.
-Realized one-key operation of charging and discharging
-Max. discharge current 2.5kA
Panel Introduction:
Charging Time:Control surge generator charging time. The original setting display as 3S, output voltage is 110ov,output surge current is 2.5kA. If need to reduce output surge current, you can reduce the charge time, that is to adjust the time of time relay, it can accurate to 0.1S.
Charging Voltage:Real-time voltage
Start:Control charging and discharging procedure.
Test: Check the lamp ON or OFF before and after the test.
Output: Output current waveform,testing surge protective device or other products.
| General | ||
| Dimension(L*W*D) | 360x345x160mm | |
| Weight | 11kg | |
| Gase Material | steel | |
| Operation Temp | 0℃~40℃ | |
| Operation Humidity | ≤75% | |
| Storage Temp | -10℃~50℃ | |
| Power Supply | AC-220V | |
| Technical | ||
| Allowable Tolerance of Impulse Current | Front time | 8us±10% |
| Time to half value | 20us±10% | |
| Surge current | 2500A | |
| Over-impulse range | ＜20% | |
| Max Charging Volage | 1100V | |
| Power consumption | 50W | |
| Charging Volage Display | 4 Digital LED display | |
MOQ is flexible and can be negotiated. Depending on your system solution, Accept Customization for Small Orders. Design products as your specification. Professional protection and stable performance for global projects. Submit an online message. Reply within 24 hours by email.