TUV certified 4-pole AC SPD, 275V ,surge arrester Type 2

FATECH FV20C/4-275S is a TUV certified 4-pole AC surge protective device for 3P+N power systems. It provides full-range surge protection for three-phase four-wire distribution boards, industrial control systems, and commercial building power supply. It is widely applied in factories, shopping malls, data rooms, and infrastructure power distribution.

-Consisting of a base part and MOV pluggable protection modules.

-For using in the lightning protection zones concept  at boundary 1-2.

-The core parts are metal oxide vristor components with high discharge capacity.

-Low residual voltage and quick response.

-Reliable control thanks to Thermo Dynamic Control disconnector.

-With remote signaling contact for control device.

-Fault indication via red mark in the inspection window.

-Protection mode:L1,L2,L3,N-PE.

1.Coding

2. Dimension                                                3. Circuit

4. Electrical parameters

Model. No. FV20C/4-275(S)
SPD protection conforms to IEC 61643-11 / EN 61643-11 Type 2
SPD installation type conforms to IEC 61643-11 / EN 61643-11 Class II
Protection level conforms to DIN VDE0675-6 C
Type of Network TT , TN
Protection mode L1 , L2 , L3 ,N-PE
Nominal Voltage UN 220/380 Vac/50(60)Hz
Maximum continuous operating voltage UC 275 Vac/50(60)Hz
Continuous operating current IC <20 uA
Residual current IPE ≤20 uA dc
≤500 uA ac
Standby power consumption PC ≤25 mVA
Maximum discharge current (8/20μs) Imax 40 kA
Nominal discharge current (8/20μs) In 20 kA
Voltage protection level Up ≤1.2 kV
Isolation resistance Risol >1000 MΩ
Response time tA ≤25 ns
Remote control contact YES
Disconnection indicator Mechanical indicator
(Green: OK, Red: Replace)
I/O Connections By screw terminal:10-35mm2
By connection bus
Installation location Inside
Mounting type Symmetrical rail (EN50022/DIN46277-3)
Color Gray
Degree of protection IP20
Housing material UL94V-0
Ambient temperature -40°C ~+80°C
Altitude ≤2000 m (amsl (above mean sea level))
Permissible humidity 30%~90%

5. Installation